Hardener for Epoxy Resin L and Gelcoat colourless
Hardener L is the most used hardener in the R&G product range. Application with Epoxy Resin L and EP-Gelcoat colorless.
Epoxy Resin L + Hardener L
Processing time: 40 minutes
Mixing ratio:
100 : 40 parts by weight of Resin L : Hardener L
100 : 45 parts by volume of Resin L : Hardener L
Curing time: 24 hours
Cold curing
Heat resistance: approx. 70 °C up to maximum 80 °C with additional 15 h at 60 °C
Material characteristics (pure resin cured) Epoxy Resin L with Hardener L:
Flexural strength DIN EN ISO 178 in MPa |
111 |
Bending E-modulus DIN EN ISO 178 in MPa |
2950 |
Tensile strength DIN EN ISO 527 in MPa |
69 |
Compressive strength DIN EN ISO 14126 in MPa |
91 |
Hardness Shore D |
90 |
Elongation at break DIN EN ISO 178 in % |
5.9 |
CYTOX Report on the Resin System Epoxy Resin L + Hardener L (see below under Additional Information): this system is not cytotoxic (cell-damaging), important for applications in medical technology.
Gelcoat colourless + Hardener L
Processing time: 40 minutes
Mixing rato:
100 : 38 parts by weight Gelcoat colourless : Hardener L
Curing time: 24 h
Cold curing
Heat resitance: 65 °C after curing over 7 days at 23 °C. A maximum glass transition temperature (Tg) of 75 °C is possible with a post cure at 60 °C over 15 h
Please order Epoxy Resin L and Gelcoat colourless separately
Resin Calculator
Calculate resins
online for free!