Mould Resin P

Mould Resin P

  • Hard elastic, good edge strength
  • Excellent grinding and polishing properties (Shore D-Hardness Ø 75)
  • Thixotropic (non-drip)
  • Manufactured in a vacuum, so optimally free of air bubbles and homogeneous

This two-component epoxy resin is coloured black for gel coats (applied thickness 0.5–1 mm) in-mould construction with high edge strength and good polishing properties. Mould resin P is processed and cured at room temperature. It can be used as a top layer in conjunction with epoxy resin laminates and laminating ceramics. In contrast to resin and metal systems, the surfaces are polishable. This tooling gel coat is hard-elastic, i.e. not brittle, and exhibits good edge strength.

Consumption: approx. 0.5–1 kg/m²

Processing:

Hardener P:
30 minutes
of processing time yielding surfaces resistant to styrene (in combination with film release agent PVA).

Please order the hardener P separately

R&G

Mould resin P, bucket/ 10 kg

(required hardener quantity: 2.5 kg Hardener P)

Item no.  1151602 Only 3 left in stock  (delivery time 1-2 days)

Add to Shopping List

349,27 
(Base Price 34,93 € /  kg)

Scaled Price

  • From Qty 2:  5,00%
  • From Qty 3:  10,00%
- +
R&G

Mould resin P, hobbock/ 30 kg

(required hardener quantity: 5.1 kg Hardender EPH 161 or 3 x 2.5 kg Hardener P)

Item no.  1151603 Delivery time on request

Add to Shopping List

923,31 
(Base Price 30,78 € /  kg)

Scaled Price

  • From Qty 2:  5,00%
  • From Qty 5:  10,00%
- +

all Prices  price incl. VAT, possibly plus shipping

Article information

type: ga
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
Instructions for use
type: si
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
MSDS
type: pi
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
Product information
type: td
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
type:
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]

Videos

Hazards identification - Mould Resin p

Hazard components for labelling

Reaction product: bisphenol-A-(epichlorhydrin), (number average molecular weight < 700)

Signal word: Warning

Pictograms:

GHS07 GHS09

Hazard statements

H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.

Precautionary statements

P305 P351 P338 IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P333 P313 If skin irritation or a rash occurs: Get medical advice / attention.

Hazards identification - Hardener P-25

Hazard components for labelling

Amines, polyethylenepoly-, triethylenetetramine fraction
Phenol, styrenated
m-phenylenebis(methylamine)
2,4,6-tris(dimethylaminomethyl)phenol

Signal word: Danger

Pictograms:

GHS05 GHS07

Hazard statements

H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H412 Harmful to aquatic life with long lasting effects

Precautionary statements

P260 Do not breathe dust / fume / gas / mist / vapours / spray.
P303 P361 P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water or shower.
P305 P351 P338 IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor / physician.
P405 Store locked up.
P501 Dispose of waste according to applicable legislation.