This remaining stock is qualitatively faultless goods without defects. Sale while stocks last.
StyLight is a thermoplastic carbon fibre sheet based on SAN (styrene-acrylonitrile copolymers). It offers high rigidity, aesthetics, good workability and dimensional stability.
- Thermoplastic, thermoformable, (from 120 °C, best result at 200 °C)
- Smooth and glossy surface on both sides
- High fibre content (45 vol.% carbon fibres)
Automotive: Seat structures, front end modules, door carriers, firewalls, center consoles, body panels automotive, body panels truck, interior trims, body panels motorcycle, exterior and interior parts with carbon fibre look
Health care: Shoe inserts, protheses and ortoses
Electronics: Backcover for tablets, notebooks, mobile phones and other mobile devices and E-Bike parts
Toys, sports and leisure: Ski helmets, bicycle parts, skis, snowboards and drones
Construction: 50 % Textile / 50 % Polymer
Thickness 1 mm: 200 g/m² Carbon fabric twill 2/2 (3k)
Thickness 0.6 and 1.2 mm: 245 g/m² Carbon fabric twill 2/2 (3k)
Polymer: Modified SAN (Styrol-Acrylnitril-Copolymeres)
Fibre volume content: 45 %
Thickness per layer: 0.25 mm
Length: + 5 mm
Width: +/- 3 mm
Thickness: max. 10 %
Tensile Modulus (23 °C) [ISO 527-4]: 53900 MPa
Tensile Strength (23 °C) [ISO 527-4]: 520 MPa
Tensile Elongation (23 °C) [ISO 527-4]: 1.0 %
Flexural Modulus (23 °C) [ISO 527-4]: 45900 MPa
Flexural Strength (23 °C) [ISO 527-4]: 770 MPa
Suitable for vacuum, compressed air and mechanical forming.
Sheet temperature range at heating: 240 - 280 °C* (< 4 min)
Sheet temperature range before mould closing: 200 °C
Mould closing speed (speed for draping): > 5 mm/s
Consolidation pressure: 0.5 - 2** MPa
Mould temperature range: 120 - 200 °C***
Demolding temperature: > 95 °C
Drying: Not necessary
Thermoforming is only possible with heated tools (pressing between positive and negative mould).
As the heat storage capacity of the material is too low, the sheets cannot be heated in the oven, as for e.g. Plexiglas, and afterwards drawn over a positive.
*depending on transport time to the mould, ** highly depending on shape, ***variotherm process recommended
all Prices price incl. VAT, possibly plus shipping
Ratings for Carbon Fibre Sheet StyLight Aesthetic (500 x 310 mm)