Elan-tech® ADH 891.892 from Elantas is a high performance adhesive based on epoxy resin suitable for bonding large structural parts. Due to its thixotropic formulation thick, uneven and even vertical adhesive joints could be realised.
Specifically developed for bonding CFRP parts, even though other materials could be used as well.
- High lap shear strength (up to 39 MPa at CFRP cured 2 h at 80 °C according to ASTM D 1002)
- High impact strength and peeling strength
- Thixotropic formulation
- Low exothermic reaction and shrinkage
Processing time (25 °C): 135 minutes*
Handling strength (23 °C)**: 4 hours
Viscosity: 100.000 to 150.000 MPas
Maximal gap fill: 5 mm
Elongation at break: 6 %
Heat resistance: 24 h / 23 °C = 60 °C; 2 h / 80 °C = 85 °C
Flexural strength: 90 MPa
Bending modulus: 2200 MPa
Tensile strength: 54 MPa
Compressive strength: 70 %
Mixing ratio: 2:1
Processing is very easy due to the application with a dosing gun. Mixing errors could be excluded through this also.
Suitable for the bonding of:
- GFRP / CFRP
- Ferrous and non-ferrous metals
- Rigid foams
Please order the dosing gun for 400 ml double cartridges (MR 2:1) (Order no 153997-1) separately.
References of the boat building industry:
Wally Europe (Italy & Tunisia), the Baglietto Group (Cantieri di Pisa, W.Magic, General Bateaux), Comar (Italy), Indiana Yachting (Italy), CMR (Italy), Cantieri Soleri (Italy), Cantieri Galetti (Italy)
References of the automobile industry:
Ferrari (Italy), Dallara (Italy), Camattini Meccanica (Italy), Škoda (Czech Republic), Fiat (Italy), Volkswagen (South Africa), TataMotors (India)
Conversion of SI units: 1 MPa (Megapascal) = 1 N/mm² = 0,102 kg/mm²
*2 mm application at 25 °C with good wettability of the bonding surfaces. At greater layer thicknesses the working time is reduced respectively due to increased exothermic reaction.
** Curing time until a minimum tensile shear strength on aluminum of 1 MPa is reached
all Prices price incl. VAT, possibly plus shipping