EP-Gelcoat colourless + Hardener EPH 161
- Colourless, transluent (not transparent)
- Can be dyed with colour pastes
- Thixotropic (non-drip)
- Manufactured under vacuum, so optimally free of air bubbles and homogeneous
- No permanent resistance to UV light (yellowing does occur), it therefore should be protected, where appropriate, against UV radiation with an additional coating (clear coat or opaque paint)
This colourless, non-drip formulated gelcoat can be dyed opaque with our Universal Colour Pastes and transparent/translucent with our Transparent Colours.
To be applicated by brush, roller or spatula.
Consumption: approx. 0.3 kg/m²
Mixing ratio: 100 : 24 parts by weight of resin to hardener
Processing time (100 g/20 °C): 90 minutes
Gelling time (0.2 mm/20 °C): approx. 240 minutes
Curing time: 24 hours at room temperature, followed by post-curing (in conjunction with the laminate) approx. 10 hours at 60 °C (recommended, but not compulsory). Maximum heat distortion temperature after post-curing (10 hours at 100 °C) ≤ 120 °C
Storage/shelf life: In unopened original containers, dark and above 15 °C at least 2-3 years.