Hardener S (15 min)

required resin quantity: 2.5 kg epoxy resin L, 2.6 kg gel coat colourless

required resin quantity: 10 kg epoxy resin L, 10.5 kg gel coat colourless

required resin quantity: 25 g epoxy resin L, 26.3 kg gel coat colourless

required resin quantity: 62.5 kg epoxy resin L

Hardener S (single component) New Quality: free of Nonyl phenol and Benzyl alcohol. Curing starts at 5 °C. • Hardener for epoxy resin L and EP gel coat colourless • Processing time 20 minutes Mixing ratio: 100 : 40 parts by weight of resin L to hardener S. Mixing ratio: 100 : 38 parts by weight of EP gel coat colourless to hardener S. Curing time 24 hours. Please order resin L and EP gel coat colourless separately. EPOXY RESIN L + HARDENER • Low viscosity, free of solvents and fillers • Fast impregnation of glass, aramid, and carbonfibres • High static and dynamic strength Epoxy resin L with the corresponding hardeners S, L and EPH 161 is the most commonly used laminating and adhesive resin in the R&G delivery programme. In conjunction with the hardeners S (20 minutes), L (40 minutes), and EPH 161 (90 minutes), this epoxy resin exhibits strengths similar to those of the laminating systems usual in aviation. The heat distortion temperature ranges from 60 °C (S, L) to approx. 140 °C (EPH 161, after hot curing). Epoxy resin L has a low viscosity, is free of solvents and fillers, and is ideal for impregnating glass, aramid, and carbon fibres. Its low surface tension, good adhesion, and minimal curing shrinkage makes it ideal for bonding wood, metal, foamed polystyrene, etc. It can be processed in all of the customary methods, e.g. hand lay-up operations, pressure and vacuum impregnation, press moulding, winding, etc. Additional information for EP gel coat colourless • Transparent, mixes with EP colour pastes • Thixotropic (non-drip) • Manufactured in vacuum, so optimally free of air bubbles and homogeneous. This colourless, non-drip formulation of overlay resin for gel coats (outer laminate layers) can be coloured with epoxy colour pastes. Consumption approx. 0.3 kg/m². Processing with hardener S (20 min), L (40 min), and EPH 161 (90 min, enhanced heat distortion temperature).