Epoxy Resin C + Hardener C (50 min)

Epoxy Resin C + Hardener C (50 min)

  • Free of solvents and fillers
  • High chemical resistance

Solvent- and filler-free laminating and coating resin with good or very high chemical resistance to a large number of media incl. aromatics (benzene), diluted acids and alkalis, water, alcohols, etc., in accordance with the resistance chart in the handbook.

The resin component inclines to crystallization if stored below 18 °C, heating in a warm water bath or curing oven will liquefy the solid bulk.

Processing time: 50 minutes

Mixing ratio:
100 : 60
parts by weight of resin to hardener
100 : 70 parts by volume of resin to hardener

Curing time:
24 hours
Cold curing

¹ Super gasoline E 10 (with bioethanol)

Coatings of R&G Epoxy Resin C + Hardener C (samples of steel, some with heavy rust traces) show no adhesion reduction, swelling or hardness decrease in the laboratory, even after years of storage in super gasoline E 10.
The steel was not ground before coating, only degreased and loose rust removed.

R&G

Epoxy Resin C + Hardener C, kit/ 1 kg

625 g Epoxy Resin C + 375 g Hardener C

Item no.  1203001 Only 3 left in stock, more on the way  (delivery time 1-2 days)

Add to Shopping List

28,74 
(Base Price 28,74 € /  kg)

Scaled Price

  • From Qty 2:  5,00%
- +

all Prices  price incl. VAT, possibly plus shipping

Article information

type: ga
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
Instructions for use
type: si
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
MSDS
type: pi
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
Product information
type: td
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]
type:
language: [language]
info3: [info3]
filetype: [filetype]
url: [url]

Hazards identification - Epoxy Resin C

Hazard components for labelling

2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)] bisoxirane
Reaction mass of 2,2'-[methylenebis(4,1-phenyleneoxymethylene)]dioxirane and [2-({2-[4- (oxiran-2-ylmethoxy)benzyl]phenoxy}methyl)oxirane and [2,2'- [methylenebis(2,1-phenyleneoxymethylene)]dioxirane

Signal word: Warning

Pictograms:

GHS07 GHS09

Hazard statements

H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.

Precautionary statements

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P273 Avoid release to the environment.
P280 Wear protective gloves / protective clothing / eye protection / face protection.
P305 P351 P338 IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.

Special labelling of certain mixtures

EUH205 Contains epoxy constituents. May produce an allergic reaction.

Hazards identification - Hardener C

Hazard components for labelling

3-aminomethyl-3,5,5-trimethylcyclohexylamine
Phenol, methyl styrenated
benzyl alcohol

Signal word: Danger

Pictograms:

GHS05 GHS07

Hazard statements

H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H412 Harmful to aquatic life with long lasting effects

Precautionary statements

P260 Do not breathe dust / fume / gas / mist / vapours / spray.
P303 P361 P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water or shower.
P305 P351 P338 IF IN EYES: Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor / physician.
P405 Store locked up.